Recent content by Seattle High Rise
-
S
Compact Bulldog Bone
For a few months now, I’ve been working with a new upgrade to my BDB that I really enjoy. So, those with a non adjustable version might be interested. I drilled a hole, installed a phenolic ball knob with thread lock, then milled down the bolt head with a grinder. It’s really ergonomic. I’ll...- Seattle High Rise
- Post #4,686
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
No, perhaps my previous photo was misleading. I’ll try and post a better one. Basically, because of my chair the rope is getting fed through my BDB at an angle. Whereas, if you’re in a tree harness the rope hangs pretty much directly below you & feeds straight in. Regardless, it’s...- Seattle High Rise
- Post #4,654
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
I’m in a bosun’s chair. The rope runs over the front of my chair when I’m working. The rope is off to the side in this photo. But, you get the idea, it’s in front when I’m working.- Seattle High Rise
- Post #4,652
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
I don’t know if my feedback helps you guys, primarily because I’m not familiar with the most popular tree climbing ropes. Personally, I think Gordon’s design is the best mechanical climbing/descender out there. The design allows the most braking leverage that you can easily release. I don’t mean...- Seattle High Rise
- Post #4,639
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
I’ve sold one. Yes, the remaining one is $200. Thx for the heads up on the Treebay option. I’m not knowledgeable on how the forum works.- Seattle High Rise
- Post #4,629
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
Thank you for the welcome. Yes more leverage top & bottom. I changed the top from 1.375 inch center hole to center hole, to 1.5625 center to center. The bottom went from 1 inch center to center, to 1.5625 center to center. I changed the bollard to 1 inch long by 11/16 wide. The spine is the same...- Seattle High Rise
- Post #4,624
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
I’m selling 2 new BDB’S that I purchased last January. They are unused, except for one, which I did one rappel on. I actually purchased 3 all together last January. I bought one, played around with it in my yard, then bought 2 more. However, as it turns out, I was too impulsive. I’m a high rise...- Seattle High Rise
- Post #4,622
- Forum: Stationary Rope Technique-Half the rope, twice the
-
S
Compact Bulldog Bone
how do I contact you to purchase a BDB?- Seattle High Rise
- Post #4,532
- Forum: Stationary Rope Technique-Half the rope, twice the
New threads New posts
-
test
-
-
-
-
Light 14 or 16" narrow kerf bar for 200t or 201t- Started by southsoundtree
- Replies: 9
-
-
