Lumberjack's latest activity
-
LLumberjack replied to the thread Chipper drum failure.What if he puts 1k hours on the chipper with no issue? 500 hours? 100 hours? 2k hours?
-
LI would. That other shop did you dirty.
-
LLumberjack reacted to Cereal_Killer's post in the thread Can I convert my GMT035 TTC into a standard dogbone style? with
Like.
It’s delicate and repairs to the TTC system are costly. The whole system even when operating properly and in adjustment behaves odd and... -
LLumberjack replied to the thread Can I convert my GMT035 TTC into a standard dogbone style?.What are the caveats? If it’s not locked, won’t it free swing? Post a picture of the top of the rotator plus the ttc part, if you...
-
LLumberjack replied to the thread mini grapples..I run a root grapple (not root rake grapple with the short tines) to make it easier to see the engagement with the ground (or preventing...
-
LI agree, I have not heard of any problems with construction batteries either. Perhaps some of the knock off batteries, but certainly...
-
LLumberjack replied to the thread Battery explosions.I can't recall seeing any problems with tool grade batteries (Milwaukee is what I use) causing problems. Construction workers are...
-
LJobber staff have told me not to use their AI receptionist yet, it still needs help… Their AI marketing email creator though is good, I...
-
LThe first place I heard about a back grind was 25 years ago. I ran the grinders but often talked to the clearing crew. They ran a...
-
LLumberjack replied to the thread Bevel buddy.Is anyone using a Bevel Buddy on a high hp, machine fed chipper? I'm still new to chipping for production so I'm developing my ideas...
-
-
LLumberjack replied to the thread Bevel buddy.From your picture, Bevel Buddy sharpens the B side, or the back side of the knife, not the side that is sharpened from the factory or...
-
LWe use a grinder a flap wheel to touch up once between knife changes, it works well but you do have to be careful not to take to much...
-
LYes, I only remove knives to swap out with fresh edge that is new or has been ground sharp by a oil grind sharpening machine. What...
-
LLumberjack replied to the thread Bevel buddy.For sure, I thought 100 hours sounds remarkably great! I was thinking about getting the garden sharpener based on your results, but...
-
LLumberjack replied to the thread Bevel buddy.The scale is a bit different, but I feel good to get 15-20 hours out of a cutting edge with no touchups.
New threads New posts
-
test
-
-
Free CEUs: February 05 & March 05 - 'Urban Forestry Today' Webcasts @ Noon (Eastern)- Started by UFT
- Replies: 0
-
-
-
-
