JMerritt
Branched out member
- Location
- santa cruz
I had to stop working on it for a bit due to my printer nozzles wearing out on me
retracting reels
- Thread starter treebing
- Start date
treebing
Been here much more than a while
- Location
- Detroit, Mi.
treegongfu
Branched out member
That looks very slick!
- Location
- Retired in Minneapolis
Nice!
macswan
Been here a while
- Location
- Champlain Valley, VT
Show off
Sweet vid dude, you make that?! Shit, pro grade. Like the new shirt too, have to earn one this summer. Looking legit AF
treebing
Been here much more than a while
- Location
- Detroit, Mi.
I had my buddy make it. he IS a pro. in that's what he does for a living. he made my rope wrench and runner vids and a couple of others. He loves climbing too, so its easy to get him to find time for it.
Is your current version using the 1mm kite string you mentioned in an earlier post or are you still using the throw line?
Nice video, I can see all the youtubers flipping off limb walks now to be just like "The Man" !!
treebing
Been here much more than a while
- Location
- Detroit, Mi.
I started doing it watching john pro videos
treebing
Been here much more than a while
- Location
- Detroit, Mi.
its throw line in the video
- Location
- Chardon, OH
That's what I thought when I saw it.
Credit where credit is do !
NICE !
Were the spinnes intended ?
Last edited:
treebing
Been here much more than a while
- Location
- Detroit, Mi.
it comes out a little different every time. I had weighted the line with throw weights which I had forgotten about until I saw them flying around through the air at top speed as I neared the ground. hence me slowing down and also the rotations after I hit the ground is me trying to bring 24 oz of lead + a quickie to heel.
treebing
Been here much more than a while
- Location
- Detroit, Mi.
he shot from the ground and in the tree and they are different climbs. the flip is a different flip in the close up then the far shot. If you look at it close it doesn't quite make sense. I did that climb like eight times. if you notice I am wearing different gloves when I unclip from the SAKA footloop and then reclip into the bra.
treebing
Been here much more than a while
- Location
- Detroit, Mi.
kite store was amazing today found my new throw line for sure the kite harness wire is really neat the black string. it is a monofilament of Spectra within a nylon core so it's stiff but knot tieable.
I made a slight improvement to the bubble wrap and tape casing, more like over did it.
The aluminum tube is 1 3/4" i.d. with a 1/16" wall. A more user friendly one, with just a thin metal front and back, would only be 3/4" thick. The one I made would probably be better suited for Sunday climbs!
The aluminum tube is 1 3/4" i.d. with a 1/16" wall. A more user friendly one, with just a thin metal front and back, would only be 3/4" thick. The one I made would probably be better suited for Sunday climbs!
treebing
Been here much more than a while
- Location
- Detroit, Mi.
that is the sweetest! did you carve that monkey?
Barc Buster
Branched out member
- Location
- The land shaped like a hand
How's the price compared to regular throw line?
treebing
Been here much more than a while
- Location
- Detroit, Mi.
they seemed to give it to me really cheap. 4 rolls of spectra two different sizes 300 lbs and 500 lbs and the harness wire was 75. I have always wanted. something slightly smaller than the 1.75. I think the 500 lbs is more like 1.5. the tangle might be the factor, and the ability to haul up a rope. but it might fly an 8 oz really well.
My initial plan for the chimp was for it to be of a shallower profile and more stylistic.
The next one, for tree work, will be an all metal,simpler version.
Please keep us updated on how the kite string works. Changing the angle of where the cable comes off the reel to a now center hole, the cable is quickly forming a groove on one side of the hole.
The next one, for tree work, will be an all metal,simpler version.
Please keep us updated on how the kite string works. Changing the angle of where the cable comes off the reel to a now center hole, the cable is quickly forming a groove on one side of the hole.
