Solid WC17

rugger01

rugger01

Participating member
Location
MA
I'm selling my 2003 Woodchuck WC17. It is a 12" disc chipper and everything works as it should. It has a 4cyl John Deere diesel motor. I just had the brakes and wheel bearings done, newer water pump, plenty of tread on tires. Comes with an extra set of knives. This is a great machine. I have had no issues with it. I am selling it because I am upgrading to a larger machine and do not need two.20170502_072821.webp 20170502_072745.webp
 
Sorry the price is $10,500. Idk where the tag would be. Mine doesn't have one. Instead some of the SN is welded on the frame. I called Altec and they were able to look up the machine using those numbers.
 
rugger01 said:
Sorry the price is $10,500. Idk where the tag would be. Mine doesn't have one. Instead some of the SN is welded on the frame. I called Altec and they were able to look up the machine using those numbers.
Click to expand...

I saw that on yours: time to get out the brush Grinder.

Thank You.
 
For a while I had a dump truck without much tool storage so I used to keep my pole saws in the pvc tube I mounted on the chipper.
 
I bought it about 2.5 yrs ago. I do not know the hours as the hour meter has never worked. I never bothered to replace it. I simply perform maintenance based on use. I teach full time so I only do tree work on weekends vacations etc. I am also a small company so I am on every jobsite. So it gets serviced as needed. It is located in southeast MA.
 
We have a WC17 with a Duetz, problem we have is the hydraulic pump seal. if that pump isn't perfect, it pulls a little, seal goes, did it to us yesterday, parts cheap, but we lost 2 days.
 
I was also told that unicorns were real. Thanks for adding your 2 cents. Still for sale. Issue free.
 
You must log in or register to reply here.

New threads New posts

Back
Top Bottom