2007 brush bandit chipper dump combo. Model 95 XP, 51hp Cat diesel. Only 224 hours. 9 inch chipper. Hydraulic lift/crush. AutoFeed. 2 extra sets of knives. Can be pulled with a 3/4 ton pickup., Excellent shape, $22000.
Brush Bandit 95XP chipper/dump combo
- Thread starter ronnyb
- Start date
AxeTree
New member
- Location
- central ohio
That's a good deal for some one! 90xp is a beast o a chipper for its size!
CutHighnLetFly
Been here a while
- Location
- Cape Cod, MA
where are you located
MikePowers321
Carpal tunnel level member
- Location
- Leeds, Ny
That looks like a great set up. Any more pictures? Different angles and the dump raised would be awesome.
Located in tropical Milwaukee, Wisconsin. Yes great price considering that they are $45000 new. I have more pics, but I know that I don't have any with the box dumping.
if you have any questions you can call me at 414-324-5462. These are pretty rare machines. I believe Bandit only builds them on order. I bought this from a city in Oregon and had it shipped. Thanks for looking.
TCtreeswinger
Branched out member
Chipper is on a swivel table I assume?
AxeTree
New member
- Location
- central ohio
Yeah
Yes these will rotate about 240 degrees.
Magnum783
Participating member
- Location
- Cheyenne WY
Do you remember how much shipping was? What did you pull it with?
tc262
Branched out member
- Location
- SE Wisconsin
Looks like a nice rig! What's the height of the infeed table and what's the overall length?
Shipping was around $2000 from Oregon to Wisconsin. First I pulled it with a Dodge 2500, then with an Isuzu NPR.
I will have to measure it later today.
Length from back of the chip box to the end of the pintle is 20 feet., The height of the infeed table is 34 inches. Most curbs are around 8 inches high so normal infeed height is around 36 inche
length from the very back of the chipbox to the front of the pintle is 20 feet..The infeed table is 34 inches, so with an 8 inch curb the infeed is around
26 inches high. These make great backup machines for storm work, Just hook up a pickup and go.
Retry that. The length is 20 feet. Infeed table around 34 inches but I measured it when it was not on the truck. Probably more like 32 inches.
