Search results

  1. Jehinten

    thoughts on this 2013 f750? under cdl

    Perhaps call a mechanic local to the truck to look it over before you drive out there? It might save you the trip if it isn't mechanically sound.
  2. Jehinten

    thoughts on this 2013 f750? under cdl

    I don't know that truck specifically but I used to have a similar sized truck that was a bucket truck with a chip box that pulled a 12" chipper. It did fine and had a 366 gas engine in it. It wasn't fast but it did the job. I imagine the boom and all additional components and hydro fluid...
  3. Jehinten

    ArbPro Clip 'n Step boots size 13 FREE???

    And unfortunately not big enough for some of us. Otherwise I'd love to try these boots out.
  4. Jehinten

    Grapple Truck Search

    Same here. The only reason to want a dump bed in my experience is to dump out the "fluff" of twigs and leaves. I usually just leave them most times I unload and occasionally I'll spend a few more minutes getting that fluff out. It never builds up enough to affect capacity. @BrendanG...
  5. Jehinten

    2nd Stihl saw for climbing

    Mine was modded by mastermind work saws. He does only port new saws.
  6. Jehinten

    New saddle for heavy guy?

    I'm a bigger guy, 6'1" 290. Monkeybeaver 1.0 is what i use. Very comfortable holds a big saw with no problem without suspenders. I've tried the sequoia even before I'd gained the most recent weight and I found it very uncomfortable to hang in. On spurs was fine.
  7. Jehinten

    Teach me about dump trailers

    Just a thought on the cdl. When buying new you can have the title of a trailer derated to under cdl requirements. So you have a heavier duty trailer that is still road legal. Curious, is there much of a DOT presence on an island that inhabits 200 people? When comparing different...
  8. Jehinten

    2nd Stihl saw for climbing

    My favorite in tree saw until I need something bigger is a modded 261 with 18" bar. Small enough to fit through a crowded tree with plenty of power when you need it.
  9. Jehinten

    Teach me about dump trailers

    Rarely advertised. There are multiple trailer sales around here and only one was willing to incorporate this design into a build for him. I plan to buy the same style. They have gas shocks to assist with the weight of the ramps and he uses his to load a vermeer atx850.
  10. Jehinten

    Teach me about dump trailers

    With hand loading, look into a roll off trailer. I don't know if they make one under cdl. You can set the box on ground level and load, then raise onto the frame. You can switch beds as well if ever needed. Or there is the option of fold down ramps built into the tailgate like this A buddy...
  11. Jehinten

    climbing with big saws

    No fancy techniques but the right harness makes a big difference. And I'm sure not all climbers will agree on "the right harness" for everyone. A tophandle would pull my sequia down when I ran one years ago. My monkeybeaver 1.0 holds a 500i or 661 with 36" bar with no problem and no suspenders.
  12. Jehinten

    New CDL Requirements

    I can't say about what is required, but as part of the class, they had me get my med card. Super easy to get and maintain. The only thing that might throw a wrench in mine is that I have been diagnosed with severe sleep apnea since then. My doc purposely chose an apnea machine that...
  13. Jehinten

    New MS400c

    I like mine. I run it stock with a 20" 3/8 chain.
  14. Jehinten

    New HitchHikerXF

    I tend all of my devices the same way, apart from using a static cord. Mine does not slip off of the shoulder. This may be due to it being tied at my back left hip and brought over my right shoulder. When not in use I take it off of my shoulder and clip it to my right leg straps.
  15. Jehinten

    Today....

    Large sycamore removal for my neighbors. This tree has been dropping large limbs for years and despite the root rot it's trunk was very solid. Felled with a 500i/36" bar. No pics of the whole tree as the undergrowth was too thick to see the top of the tree well. Due to years of...
  16. Jehinten

    Cabling this Birch tree

    That's such a simple solution and yet one I've never considered. Thanks. Yes these Birch are very elastic. I will sometimes do a deep notch without a backcut letting the tension side give way like this for maximum directional swing. With or without a pull line. I also find that rarely...
  17. Jehinten

    Cabling this Birch tree

    He really wants to keep it. Although removal of the one would be the easiest fastest option. I don't believe it is still actively failing, more so that it did in January and then the ice melted. He said it was touching the ground at one point.
  18. Jehinten

    Cabling this Birch tree

    A customer has a Birch tree that saw a significant load in January during an ice storm. He has asked me about cabling the tree back to the other leads. Upon inspection the trunk does have damage where it started to fail. Minimal risk, it's near a home but out of reach. I would definitely...
  19. Jehinten

    Ford F-350 as a chip truck

    I've chipped into this setup a few times. F350 11,000gvwr 12' flatbed with an 8' box. Side loaded a mini skid and towed a 12" chipper. For everyday use, I'd recommend a bigger truck, but for an occasional job or to use a couple of months to increase income and purchase a larger truck, it...
  20. Jehinten

    Ryan’s Garage Sale

    Received the lockjack yesterday. Thanks!

New threads New posts

Back
Top Bottom