Search results

  1. Jackjcc

    Problem with Stihl electronic carb on MS 362 C-M

    So it is happening in multiple saws or just one? If you continue to have problems, the hard starting has been attributed to malfunctioning solenoids that control the mixture. It's a cheap part, but the saw should be under warranty. Take it back to the dealer and have them check it out. Sent...
  2. Jackjcc

    Looking for ideas on how to store chainsaws in the shop.

    I would recommend this. It's very easy to build a tiered stand that will hold saws and you can make one size fits all. Sent from my iPhone using Tapatalk
  3. Jackjcc

    Saw Modz

    I don't know about that. Too much fuel kills power. You should work on getting it tuned in wood. That will get you closest to max power. Sent from my iPhone using Tapatalk
  4. Jackjcc

    Saw Modz

    The big bore kits are not known to always produce more power. The port timing may be off and the power never fully realized. Is the power now noticeably than the 650 top end? Sent from my iPhone using Tapatalk
  5. Jackjcc

    Ms150 bar nut

    The bar stud came out? If so yes, red loctite it back in. Sent from my iPhone using Tapatalk
  6. Jackjcc

    Saw Modz

    Yeah, that should be pretty close to where the clutch will grab and you don't want that thing turning at all if it's on your saddle. Idle tuning took me the longest to get figured out. 4 stroking is easy to figure out, setting the idle, low, and high correctly to get smooth acceleration and...
  7. Jackjcc

    Saw Modz

    Usually 2800 for idle. After muff modded the top end should increase by some over manufacture recommendations. Each saw is different so you just need to make sure it 4 strokes out of the cut and cleans up when cutting. I can't find the max rpm for saw, husky list the max rpm for power as 9600...
  8. Jackjcc

    Stihl 025

    It sound like it is flooding. Heat will cause expansion and pressure to build in the tank. The tank vent may not be functioning correctly so pressure builds which forces fuel into the carb. This could cause fuel to seep through carb through old gaskets and poor seals. The fuel that seeps through...
  9. Jackjcc

    Wonder What's Going On In It?

    This is fascinating. I've been wanting to know this for some time. Sent from my iPhone using Tapatalk
  10. Jackjcc

    Check these out

    AS seems to be leading the charge on banning the mention of other sites. Tree buzz could care less. Sent from my iPhone using Tapatalk
  11. Jackjcc

    Maintaining Saws

    Arborist site is a great resource for assistance, manuals and past experiences of others. You saved a lot of money fixing those saws yourself. Did you have to do any major repairs? Top end? Bearings? Sent from my iPhone using Tapatalk
  12. Jackjcc

    Who can mod an MS 661 in the southeast?

    The 661 is doesn't need to be woken up. It's a terrorist right out the box. If you did 42" half or full skip chain you would be fine. You should be fine with the Stihl rollermatic bars. Sent from my iPhone using Tapatalk
  13. Jackjcc

    Drone filmed Crane Removal, Tree growing out of House

    There's no way to keep it from moving since those picks are vertical and slung from one side. I was just curious, amazing video and nice work.
  14. Jackjcc

    Drone filmed Crane Removal, Tree growing out of House

    Do you have your operator pre tension the load prior to cutting? Sent from my iPhone using Tapatalk
  15. Jackjcc

    Mix oil PSA

    My 40 year old dolmar says I should use 32:1 as per mfg, but I don't. Fuel quality has changed much like oil quality has. You wouldn't have an issue running 87. Sent from my iPhone using Tapatalk
  16. Jackjcc

    Mix oil PSA

    Higher octane does nothing for saw power, so it's not that bad. Sent from my iPhone using Tapatalk
View older results

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom