Search results

  1. flyingmosstreen

    The latest Matt Cornell harness

    Haha I am a tinkerer. This is just a fun project build, if I can get it dialed then maybe I’ll break it out for pruning jobs or something. My monkey beaver is my work saddle and straight up lazy boy comfort.
  2. flyingmosstreen

    Today....

    Beautiful view. Decrepit Ash. Droppin decent sized logs with the 462.
  3. flyingmosstreen

    The latest Matt Cornell harness

    Good to know. Thanks for the tip. I want to mirror the leg loops so I will probably redo both. None of the back splices or brummels are whipped yet.
  4. flyingmosstreen

    The latest Matt Cornell harness

    Iteration #2. Went with 1/4” dyneema woopie sling for adjustable leg loops. And found these sweet soft shackles at west marine for the lower connectors. And tiny friction rings. Feels very sleek. I also realized I could still use the upper “d” as it’s just loops that I can connect lanyard to.
  5. flyingmosstreen

    DMM Harness

    Petzl has some video online of a rolling technique to shorten their adjustable bridge. Think, while suspended, pivot to the opposite D of the adjuster, grab the bridge tail, and hip "thrust" or rotate while taking up slack. If any of that makes sense...
  6. flyingmosstreen

    The latest Matt Cornell harness

    Nice, do you attach the uppers with the overhand as standard setup? I like the idea of the Odin rings. I have one that I've messed around with as a friction saver component. The rock exotica rigging plates are super good on my monkey beaver though. I would need to figure a way to use them with...
  7. flyingmosstreen

    The latest Matt Cornell harness

    First attempt with the setup. Frankenstein. I never use the upper dees so went without. Shrink tube for rigidity. It’ll take some refining but the idea I think is there. Fun build!
  8. flyingmosstreen

    Custom Protos!

    Just a couple stickers. Cutout of bifrost and Hildegard (I think) Cutout axe and leaves from another sticker. Made my own rebel alliance decal (it’d be cool to make it a tree in the middle) like Endor’s supply Pretty simple but I like the little bits
  9. flyingmosstreen

    Sg40 Bandit Stump Grinder

    Yeaaa no video. I’ll try and upload a different way when I get home. Getting rained on right now :)
  10. flyingmosstreen

    Sg40 Bandit Stump Grinder

    Not sure if the video will load… but we smashed through three decent sized ash stumps. First one was maybe 30” at the flush cut and we ground a 6’x6’ swath in about 40 minutes. The teeth were touched up but not the sharpest ever. That machine only has about 140hrs on it.
  11. flyingmosstreen

    Sg40 Bandit Stump Grinder

    The controller takes a minute to get a rhythm but it's pretty amazing. The direct drive is a pretty solid setup I think. Sharp teeth makes it pull super long ribbons. The back blade is also nice for pushing the pile. No flaws at all from what I've seen. The boss is pretty religious with...
  12. flyingmosstreen

    Today....

    Caught the Covid (from my 95 yr old grandma!) had a couple days to recoup. Feeling much better. As is she thankfully. Finnnnally got the gumption to carve a spoon. It’s been too long. I was on a streak of a spoon a day for a while! So this feels right to get back at it with some new...
  13. flyingmosstreen

    SIP chainsaw pants/ breathe flex work jacket

    Pants sold. Thanks Phil!
  14. flyingmosstreen

    SIP chainsaw pants/ breathe flex work jacket

    Pants pending
  15. flyingmosstreen

    SIP chainsaw pants/ breathe flex work jacket

    130$ for the SIP reflex model chainsaw pants. They’re a great pant I just have a few other pairs that fit me better. Even though they’re black, the zipper vents on the back do a great job of air flow. Better than the Arbortec freestyles tbh. I wear a 30” waist, I can get away with no belt for a...
  16. flyingmosstreen

    New Bandit 19XPC with Cat C4.4 Diesel Problems

    How do you like the gas engine? What are RPM when chipping? Our 12xpc runs around 2200 when wide open. We did have a DPF issue, called a cat mechanic for a service call to reset codes. Hasn’t let us down in that regard since (knock on wood.) We did however have the pilot bearing go out...
  17. flyingmosstreen

    Remembering Norm Hall

    Will it be a Normway Maple?
  18. flyingmosstreen

    New England rope Fly

    https://arbsession.com/teufelberger-fly-rope-11mm.html Here you are sir
  19. flyingmosstreen

    MS200t rebuild kit and service manual

    Sawsalvage has a kit. Might be a farmtec kit though
  20. flyingmosstreen

    I had to comment!

    Little devils advocate here, Would you have rather seen them on a ladder instead? OSHA wants you “tied in” above 6’. I guess he could’ve thrown a harness and lanyard to the bucket. But I would be much more comfortable on the bucket platform than a ladder…. Again devils talk here

New threads New posts

Back
Top Bottom