Birdyman88's latest activity

  • Birdyman88
    Birdyman88 replied to the thread CCW while you climb?.
    Yesterday I was at a property next to my rental about to take a pole saw to a maple in front yard. I was in side yard talking to...
  • Birdyman88
    Birdyman88 reacted to Bart_'s post in the thread Brush trailers with Like Like.
    If you've watched the Beverly Hillbillies intro with them moving, I sometimes refer to trailer loads as Beverly Hillbilly loads. I use...
  • Birdyman88
    So I was at a good saw shop last weekend and asked the guy about switching to the .43 and he felt strongly that I should not do that ...
  • Birdyman88
    Birdyman88 reacted to Tom Dunlap's post in the thread Brush trailers with Like Like.
    Stack Strap Stack Strap Pullout lower strap Leap frog so that the bottom load doesn’t spring up Be sure to only use eye straps. Any...
  • Birdyman88
    Yes, new .043 bar with .043 gauge chain. You can technically run .043 chain on .050 bar in a pinch, but it's not a good thing. You will...
  • Birdyman88
    Birdyman88 replied to the thread Brush trailers.
    Sometimes we take the straps off and put more on if we think we need to.
    • 0526200752.jpg
    • 0526200807_HDR.jpg
  • Birdyman88
    Birdyman88 replied to the thread Flowering tree- yellowwood?.
    Flatwoods plum
  • Birdyman88
    Birdyman88 replied to the thread Brush trailers.
    I have a 6x12x2, which is 5.3 cu-yd. I routinely get 8-10 cu-yd stacking like @Tom Dunlap and others mentioned, then ratcheting down...
  • Birdyman88
    Birdyman88 reacted to Tom Dunlap's post in the thread Brush trailers with Like Like.
    On the first day of doing tree work in ‘66, I was 12, my neighbor had his son and he groundies. He had a side job doing tree work. We...
  • Birdyman88
    Birdyman88 reacted to B_Strange's post in the thread Brush trailers with Like Like.
    I just bought a dump trailer and have found that stacking the brush neatly and alternating with trunk wood lets me fit quite a bit more...
  • Birdyman88
    Birdyman88 posted a comment on the media item 3:1 DWT with RnW and OmniBlock Pulleys.
    Man I use this setup all the time without the wrench, but a porty down low. I feel almost nothing up top. I give it some slack up top...
  • Birdyman88
    Birdyman88 replied to the thread Chinese ms200?.
    I made a post here to get it off this thread, good luck https://www.treebuzz.com/forum/threads/stihl-201t-mtronic-fix.42920/
  • Birdyman88
    I posted some stuff over on OPE forum regarding possible fix for the idle issue with the 201T. This should also apply to other mtronic...
  • Birdyman88
    Birdyman88 replied to the thread Chinese ms200?.
    Reason I ask is I had a 201 with a V2 solenoid exhibit that. I fixed mine with some aftermarket o-rings I came up with spec for. I also...
  • Birdyman88
    Birdyman88 replied to the thread Anyone use a rangefinder?.
    Nikon RifleHunter since 2011. Golf, hunting, shooting, tree work has been flawless. I have literally put a stake in the ground for a...

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Kask Teufelberger Westminster X-Rigging Teufelberger Tracked Lifts Climbing Innovations
Top Bottom