Terex no longer make brush chippers?

<div class="bbWrapper">Yes, they did exit the hand fed chipper market recently. It&#039;s been talked about on here in several threads. Here&#039;s one that I know mentioned it:<br /> <br /> <a href="http://www.treebuzz.com/forum/threads/shout-out-to-carl-aka-lumberjack-on-setting-me-up-with-a-new-chipper.31924/#post-457292" class="link link--internal">http://www.treebuzz.com/forum/threa...g-me-up-with-a-new-chipper.31924/#post-457292</a></div>
 
<div class="bbWrapper">Yes it&#039;s too bad because they are great chippers ! We are loving our new 730! Thanks to Lumberjack once again for hooking me up with that! It was supposed to be our backup chipper but we&#039;ve been using it 75% of the time since I bought it in December</div>
 
<div class="bbWrapper">Anyone on here ever had clutch problems, or is it just a guy i know from my neck of the woods that was plagued with them even on a brand new machine?</div>
 
<div class="bbWrapper">At some point some company from who knows where will pick up the rights to manufacture them. Or just straight up copy them.</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 768" data-quote="craneguy1" data-source="post: 469204" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=469204" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-469204">craneguy1 said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> Anyone on here ever had clutch problems, or is it just a guy i know from my neck of the woods that was plagued with them even on a brand new machine? </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote>Not ours it&#039;s been fine we have 45 hours on it now</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 768" data-quote="craneguy1" data-source="post: 469204" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=469204" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-469204">craneguy1 said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> Anyone on here ever had clutch problems, or is it just a guy i know from my neck of the woods that was plagued with them even on a brand new machine? </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote><br /> What kind of clutch problems has he been having?</div>
 
<div class="bbWrapper">I thought I asked the same thing, but I don&#039;t see my post...<br /> <br /> The only clutch problem I&#039;ve heard of was someone who didn&#039;t know how to engage the clutch smoked the clutch with next to no hours on it. I heard they thought it should be warrantied. They were holding it against the snap over point without snapping it over... Had someone standing there holding the clutch while they fed it. At least that&#039;s the gist of what I remember hearing.</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 453" data-quote="Lumberjack" data-source="post: 469999" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=469999" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-469999">Lumberjack said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> I thought I asked the same thing, but I don&#039;t see my post...<br /> <br /> The only clutch problem I&#039;ve heard of was someone who didn&#039;t know how to engage the clutch smoked the clutch with next to no hours on it. I heard they thought it should be warrantied. They were holding it against the snap over point without snapping it over... Had someone standing there holding the clutch while they fed it. At least that&#039;s the gist of what I remember hearing. </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote>Lol that&#039;s crazy, they need to send their heads back for warranty work!</div>
 
<div class="bbWrapper">The 730 is a good little chipper, I bought one and put almost 600 hours on it, no major issues. Have about 150 hrs on a new one I bought in 2015.</div>
 
<div class="bbWrapper">We have the option to buy a year old 730 for around 18k right now. Is there any concern about parts avail. In the distant future? We will be demoing it next week, I&#039;ve heard good things but I&#039;m conflicted with the line being discontinued....</div>
 
<div class="bbWrapper">I can&#039;t speak on terex specifically since I&#039;ve never been very close to one, but every chipper manufacturer that I&#039;m aware of, with the exception of vermeer (good reason not to buy a vermeer) uses off the shelf parts.</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 6206" data-quote="Jasonk" data-source="post: 471784" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471784" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471784">Jasonk said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> We have the option to buy a year old 730 for around 18k right now. Is there any concern about parts avail. In the distant future? We will be demoing it next week, I&#039;ve heard good things but I&#039;m conflicted with the line being discontinued.... </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote><br /> We bought all of the left over inventory from when Terex shut the handfed line down. So I have or I can get anything you&#039;d need for a Terex/Woodsman chipper.</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 10495" data-quote="Trevor Balgavy" data-source="post: 471843" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471843" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471843">Trevor Balgavy said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> We bought all of the left over inventory from when Terex shut the handfed line down. So I have or I can get anything you&#039;d need for a Terex/Woodsman chipper. </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote>Trevor I emailed Todd a bit ago still looking for a winch for my 730. Can you check into that for me?<br /> Devon<br /> <br /> <br /> Sent from my iPhone using Tapatalk</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 10495" data-quote="Trevor Balgavy" data-source="post: 471843" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471843" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471843">Trevor Balgavy said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> We bought all of the left over inventory from when Terex shut the handfed line down. So I have or I can get anything you&#039;d need for a Terex/Woodsman chipper. </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote><br /> But how long is that inventory going to last?</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 5148" data-quote="deevo" data-source="post: 471848" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471848" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471848">deevo said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> Trevor I emailed Todd a bit ago still looking for a winch for my 730. Can you check into that for me?<br /> Devon<br /> <br /> <br /> Sent from my iPhone using Tapatalk </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote><br /> We have a few pieces and parts for Terex winches but we haven&#039;t been able to get our hands on a whole one yet. If I get caught up a little bit here I&#039;d like to make a few complete new ones to have on the shelf.</div>
 
<div class="bbWrapper">Ok well let me know I&#039;ve been bugging Todd since I bought it. I&#039;m first in line <br /> My emails <a href="mailto:sbtreeservice@sympatico.ca">sbtreeservice@sympatico.ca</a><br /> Devon <br /> <br /> <br /> Sent from my iPhone using Tapatalk</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 1046" data-quote="Gorman" data-source="post: 471857" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471857" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471857">Gorman said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> But how long is that inventory going to last? </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote><br /> It&#039;ll last, we can make any of the fabricated parts and have sources for all of the purchased parts for them. We have gotten into the parts business with both feet in the last year or so.</div>
 
<div class="bbWrapper"><blockquote data-attributes="member: 5148" data-quote="deevo" data-source="post: 471848" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch"> <div class="bbCodeBlock-title"> <a href="/forum/goto/post?id=471848" class="bbCodeBlock-sourceJump" rel="nofollow" data-xf-click="attribution" data-content-selector="#post-471848">deevo said:</a> </div> <div class="bbCodeBlock-content"> <div class="bbCodeBlock-expandContent js-expandContent "> Trevor I emailed Todd a bit ago still looking for a winch for my 730. Can you check into that for me?<br /> Devon<br /> Sent from my iPhone using Tapatalk </div> <div class="bbCodeBlock-expandLink js-expandLink"><a role="button" tabindex="0">Click to expand...</a></div> </div> </blockquote>--------------------------------------<br /> <br /> To Trevor:<br /> Looks like you may be the one to ask ..... I&#039;m a small woodlot owner (about 50 acres) and looking for a chipper to manage my own property. Have been keeping an eye out for a machine (2nd hand) that is big enough to take care of anything I&#039;ll throw to it. I&#039;d like to chip up to about 6&quot;. Anything bigger than that I&#039;ll make firewood. Of course, cost is going to be the big factor. I see a Terex 705 in craigs list for under 8K.<br /> Previous conversation strings mention that Terex isn&#039;t making chippers anymore... but you mentioned that you bought up parts inventory... and someone said that Terex (among others) used off-the-shelf parts.<br /> So..... I&#039;d like to get an opinion on the 705.... and how easy will it be to get parts for that machine?<br /> Would like to hear anyone elses opinion also.<br /> Thanks.<br /> Joe</div>
 
You must log in or register to reply here.

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom