Multi one mini loader 2.3

AxeTree

New member
Location
central ohio
2017 multi one 2.3 mini loader with cab. (Minus one door glass.) evey thing works as it should. Has bucket. 150 hours. Don’t use it as much as I thought we would. $15,500 Very small fast loader specks below https://www.multione.com/2-3-efi/
 

Attachments

  • IMG_8120.jpeg
    IMG_8120.jpeg
    138.5 KB · Views: 96
  • IMG_8119.png
    IMG_8119.png
    479.9 KB · Views: 96
We never priced the door glass we had the door off before it broke, as it was just an inconvenience as much as we get odd and on the loader. The attachment plate is the euro mini, slightly smaller than the US mini a piece of 1/2 flat bar welded into the loader attachment olate
And it fits the. The two pin holes are a little narrower so you have To drill two 5/8 pin holes for the latches
has heat and a heated seat no a/c
 
Multi-one, good product... Believe vermeer bought them out, at least in the states. Pretty sure they were arou8nd before avant... 150 hours is basically brand new.
 
Multi-one, good product... Believe vermeer bought them out, at least in the states. Pretty sure they were arou8nd before avant... 150 hours is basically brand new.
No, the other way round, Avant predate MO.
Rebranded as Vermeer in the US these days.
Both good machines, have run both.
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom