Making a 3/4 bull rope useful?

[Logan Bryan]

So we have many short pieces 15'-30' of 3/4" bull rope. My question is it okay to tie off lets say a portable wrap or and block to lower limbs and chunks? And what type of hitch should I use. And what knot is best to use to tie to porta wrap?

 

[CanadianStan]

So we have many short pieces 15'-30' of 3/4" bull rope. My question is it okay to tie off lets say a portable wrap or and block to lower limbs and chunks? And what type of hitch should I use. And what knot is best to use to tie to porta wrap?

Girth hitch the porty
Then cow hitch the whole thing around the tree with half hitch backup

The bull rope is fine for the portawrap. Just be aware of its WLL and what you’re going to be dropping into it

As for tying off the block, just remember that THAT specific rope is going to be seeing twice the load of the piece you’re rigging, ie twice as much load as the portawrap is receiving. Rig appropriately

 

[RopeShield]

slide porti into loop, wrap 2 pull 1 or wrap 3 pull 2
or slide porti into loop of rope and timber hitch to tree