CE Lanyard Rope

Santiago Casanova

Branched out member
Location
Sink Hole
I think I found the manufacturer of the CE lanyard rope. It is listed as 11mm in the tefulberger specs but it feels smaller. This manufacturer lists it as 10mm. The 10mm rope has a stronger rating than the 11mm tefulberger rope. This is also the same company that makes the reep schnur 10mm rope. I believe places like west marine can order spools from FSE Robline.

https://www.teufelberger.com/en/celanyard-e2e.html

https://www.fserobline.com/en/products/cruising/products/detail/Product/sirius-550/
 
What do you mean "found"? Was it not known it is Teufelberger?

Sent from my SM-G955U using Tapatalk
 
I think I found the manufacturer of the CE lanyard rope. It is listed as 11mm in the tefulberger specs but it feels smaller. This manufacturer lists it as 10mm. The 10mm rope has a stronger rating than the 11mm tefulberger rope. This is also the same company that makes the reep schnur 10mm rope. I believe places like west marine can order spools from FSE Robline.

https://www.teufelberger.com/en/celanyard-e2e.html

https://www.fserobline.com/en/products/cruising/products/detail/Product/sirius-550/


Digging this up..
Santiago.. are you sure that's it? I mean the pattern sure looks like it.. but the core does not look correct.. I was always under the impression it was a DB until recently.. shit, i actually thought it was tachyon for a while.. However, recent conversation have lead me to believe it's always been a parallel core... Like Fly.. KMI.. etc..

I actually posted a vauge question about splicing the CE Lanyard just to see what the general consensus was on the construction.. I do know it's been changed a few times.. went from 11m to 11.5 & now of course an additional size of 12.7..
 
As of the time I posted it was accurate. I don't know what they sell with the lanyard now. It used to be a polyester kernamtle that measured 10mm but was sold as 11mm. As far as I know it is not splicable. Prove me wrong Jimmy!
 
As of the time I posted it was accurate. I don't know what they sell with the lanyard now. It used to be a polyester kernamtle that measured 10mm but was sold as 11mm. As far as I know it is not splicable. Prove me wrong Jimmy!

Sorry bud you lost me there for a sec.. & now I'm probably gonna lose you with my response as I'm trouble laying out what I'm trying to say..
So.. When you posted this last April of 18', your implying the the CE/Hipstar was a double braid like the link suggests.. but go on to say that you don't know what it is now (in the course of manufacturing events & changes towards this lanyard, id want to think April 18 is pretty current as in "now" considering the extensive rating process they put them through).
You go onto say it "used to be" a parallel core & not splicable..
However, what i have in my possession shows it still is a parallel core & it's brand new right off the line.

That "vauge" question i mentioned earlier, promoted a small conversation about it over in our favorite splicing thread in case you want to add to it with what you've seen or haven't seen..

Personally, I think your correct with the link as far as the cover goes. But the core in the link is not what I've seen first hand. Hence the reason we've never ever seen anyone splice a new end into their Ce Lanyard after nicking/slicing/damaging... at least i haven't. Not even in the hundreds of pages of our favorite ole' thread, where you'd think "if possible" youd see it there, it isn't.. you know what i mean? Individuals are always left spending another insane amount of $$ on a proprietary replacement..

Now they call it hipstar flex or something like that...

Yes, it's hipstarflex now.. silly if you ask me, but IIRC, they dropped the CE rating so i believe they felt the need for name change.
 
Last edited:
I don’t think they dropped the rating, it now covers all the countries where it is sold, not just in Europe, thus the need to change the name. The CE and the hipSTAR Flex lanyards seem to be almost totally different. The new one has a 7mm Ocean Dyneema thimble Prusik now. The lanyard ropes are different, which might have happened before the name change.


Cutting off their eye and doing your own would certainly void the CE cert., not that it matters here in the Wild West.

Also, Robline recently dropped the FSE from their name.

Here’s a 8 ft piece of dynamic rope that had the core pulled out and the cover milked back. It was too stiff before, better after not being packed so full. Probably not so dynamic now, though.
E7751A3A-B0CA-41D1-9768-FDF62637F252.webp
 
Last edited:
Hey guys.. I just received a brand new one. Here's a few pics that will provide some clarification. Looking forward to putting it to use. I got the 10m version for working in canopies. With the extra length I can pretty much use it as a second climbing line & reset as needed. Still has the CE cert but the eye is sewn, not spiced.
 

Attachments

  • Lanyard 1.webp
    Lanyard 1.webp
    413.2 KB · Views: 21
  • Lanyard 2.webp
    Lanyard 2.webp
    415.6 KB · Views: 26
  • Lanyard 3.webp
    Lanyard 3.webp
    101.8 KB · Views: 27
I don’t think they dropped the rating, it now covers all the countries where it is sold, not just in Europe, thus the need to change the name. The CE and the hipSTAR Flex lanyards seem to be almost totally different. The new one has a 7mm Ocean Dyneema thimble Prusik now. The lanyard ropes are different, which might have happened before the name change.


Cutting off their eye and doing your own would certainly void the CE cert., not that it matters here in the Wild West.

Also, Robline recently dropped the FSE from their name.

Here’s a 8 ft piece of dynamic rope that had the core pulled out and the cover milked back. It was too stiff before, better after not being packed so full. Probably not so dynamic now, though.
View attachment 57689
Son of a gun.. look at that.. it's a 4 strand carrier.. Remember what i was saying in the other thread, how the peice of cordage i have is a dual strand?

However, beyond the CE, ratings, the cover, etc.. what is on the inside? You mentioned the CE vs Vs Hipstar lanyards themselves seem to be different ropes.. what are you seeing?

Regardless,
Can either be spliced by traditional hand methods or not? We're they a double b or parallel? We're they indeed the linked Sirius page way above.. i want them to be, but don't think they are.. I do however, believe the cover of it is being used & they're may possibly be a change up in carrier strands when u go to the 12mm. T-berg sometimes does this without mention. Like their Epicord, the 8mm cover strands are different than that of the 9.3mm & 10mm..

Without getting to far into the sticks here, as long as it's been available, hasn't the 7mm Loop T always been an option or interchangable with the Ce CeLanyard? Doesn't it also ride on the smaller "Fimble Climb" & Pullysaver?

Not for nothing but if you look at all the safety ratings in there, i wonder if there's some literature in there stating "Cordage's meeting this rating must be" =
of braided core
of paralell core
That would definatley help figure out what's in there.
It's interesting too note, that you think the ropes are two different cordage's, i see differences in cores, everything with the names change, But they are still calling it 11 Sirius.. Not Sirius Bull rope, Not Sirus 550, Or any other version... Just "Sirius".....
"Hey! Why so serious?"..lol

{Ok.. i see what your talking about with the core on that dynamic rope, interesting trick, i like it..(for clarity to others, the first half of this convo/pic reference started in another thread)}.
 
Last edited:

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom