diy

  1. D

    Echo CS 355T throttle and kill switch repair

    Hey guys, My kill switch wasn’t working on my 355T so I took it apart. I have the diagram to put the top handle back together but has anyone done it? There are no videos of that on YouTube and it’s pretty complicated haha
  2. Phthalocyanin

    Kneen't Ascender

    A DIY solution for rope-walking while I wait for an ascender in the mail. One hand ascender, couple of carabiners, a trango sling, a length of garden hose, a bit of bungee cord, and we're off.
  3. metaspencer

    4 DIY Port-A-Wraps

    Hi all -- after reading on here in various places about DIY portawraps, I thought I'd try my hand at making a few: small, medium, a hitch-mounted version, and a take on a bollard. Some of the ones I mocked up are better than others and all are a little rough, but I'm posting in the event that...
  4. P

    Concerned about zipline killing trees

    Hello everyone, I built a DIY backyard zip line, and it goes across my pool. I know about the cambium layer in the tree, and I am a bit concerned about killing my 11.5-inch diameter oak trees. The zip line is wrapped around them, and it is 1/8 inch galvanized cable. I cut a section of garden...
  5. Jehinten

    New (possibly) knee ascender

    OK, this all got started as I was reading about the SAKA being taken off the market, and to my understanding it is because of a "bungee in a straw" (just so anyone who reads that opening line and groans thinking this is going to be ranting about that situation, please continue reading, that is...
  6. gijs

    rw zk2 measurements

    hi, need some help from some on whit a rope wrench. if any can give my a picture whit a ruler next to the RW zk2 that woud help a lot like this one but then the zk2 the more measurements the better best regards gijs

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom