Search results

  1. Logan Bryan

    Brittle wood?

    These are the two I’m going to pull
  2. Logan Bryan

    Brittle wood?

    gonna take down fence and do minimal rigging and drop top towards fence
  3. Logan Bryan

    Brittle wood?

    Have 2 with a slight back lean. They are about 55 feet tall. Big wood till about 40ft. I shouldn’t have any trouble putting a bull rope at about 40 ft and pulling it should I ? It’s about 24” diameter at bottom and 14” at 40’. As long as I don’t pull to hard I think it will be good. The 3rd...
  4. Logan Bryan

    Brittle wood?

    Princess tree Paulownia. Has anyone climbed or rigged of this tree? I looked it up and looks like the strength of the tree will be pretty weak. Im just learning with climbing. Been a bucket baby for awhile. But have to rig a few limbs off and wondering how strong it actually is.
  5. Logan Bryan

    Making a 3/4 bull rope useful?

    So we have many short pieces 15'-30' of 3/4" bull rope. My question is it okay to tie off lets say a portable wrap or and block to lower limbs and chunks? And what type of hitch should I use. And what knot is best to use to tie to porta wrap?
  6. Logan Bryan

    Grapple truck

    We have a 'city truck' single axle front mounted 25 yard truck and have ran it since 06. But being it needs replaced I'm thinking about getting a rear mount single axle with a large tag axle to help get a little larger box. like 35 yards (18'-7'-8')maybe. we don't won't something to big but do...
  7. Logan Bryan

    Samson stable braid 1/2" and 9/16". Double braid rigging lines. Brand new!!

    9/16 180? Price
  8. Logan Bryan

    DIY Throw ball cannon

    Yessir I am worried about the safety factor of the homemade version. Im going to wrap something around it to protect me if it blows up. I will own the APTA eventually. I have so little money in this I wanted to try it out and see how well it works. Thanks you sir!
  9. Logan Bryan

    DIY Throw ball cannon

    it is surprisingly fast I feel like. The plastic valve felt much quicker than the metal valve in the store to me.
  10. Logan Bryan

    DIY Throw ball cannon

    It is 1 1/2”. Guess the tampering is the key! Thanks
  11. Logan Bryan

    DIY Throw ball cannon

    So I made this this morning and tried it out. But was expecting better results. Around 80-90 psi with 12oz ball shot around 50 ft high with a little stuffing around ball because I think ball is to small. I was just gonna see if any of y'all had any suggestions because I've seen them shoot balls...
  12. Logan Bryan

    Aerial lift of conn al-52 heigh?

    52 feet to bottom of bucket. so like 57 working height. I think I would wait till a taller bucket comes around. we have a 55, 65, and 70 each have their uses with the 65 getting used more than any. a few tree u will barely reach the first limb with a 55 footer. Just my suggestion.
  13. Logan Bryan

    DMM Biners + Hitch Climber, Focus Swivel, Buckingham Ergo Economy

    Harness still for sale?
  14. Logan Bryan

    Bobcat exhaust

    We welded ours up 2 years ago still holding!
  15. Logan Bryan

    Led strobe lights?

    We are ready to replace or old outdated strobe light with new led ones on a few of our trucks. Looking for grille and surface mount ones. Not wanting to use a control box just want to wire them to one switch to turn them all on. Which brand or lights do you recommend? Looking for around 12-16...
  16. Logan Bryan

    Rear mount grapple trucks

    We don’t chip but with stump grindings just unload them like u loaded the with the grapple. It really doesn’t take that long
  17. Logan Bryan

    Rear mount grapple trucks

    For us a single Axel is easier for us as we have many free dumps and loaded travel time is very minimal. The lighter truck and shorter truck gets us in many place big trucks can't go and leaves less of an impact. Im just curious cause I've never really seen one and it seems like it might fit us...
  18. Logan Bryan

    Rear mount grapple trucks

    The loader is 4500lbs. So not too much weight. Does anyone have pictures of one?
  19. Logan Bryan

    Rear mount grapple trucks

    So we have a single axle truck with the grapple being a center mount. My question is there any single axle rear mounts? I feel having the extra reach on the rear would be better than the dumping. But I’ve necer seen a rear mount single drive axle. Using a single axle truck is so much easier to...
  20. Logan Bryan

    De-rating a truck to get under CDLs?

    Yessir it will but will they be willing to really “work”. 4 out of 5 people that come to work for us that come with CDLs have very little to any hard work in them. But I will have to give and take some to get what I need I guess.

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom