Something to try

welltree

welltree

New member
Location
Ontario Canada
If anyone is looking to buy a new stump grinder I have something you may want to try. Today I tried a bandit 2650 machine and was very surprised, I have always like rayco stumpers as we run 9 of them but newer machines have not been as good as rg50 , RGsuper50 but I was impressed by this new model bandit. 61 hsp with a 69 inch arc and 18.5 inch depth was a nice smooth machine. It had a revolution wheel on it .i removed a 4ft white elm stump that was 10 inch above ground to 14 inch below in 30 min.just my opinion but give it a try if you have a chance
 
If you liked the 2650, then you would be impressed with the 2900T, we've got one and man its friggin awesome.. On tracks (Retractable Tracks 35" wide retracted 56" extended), 97hp Perkins, revolution wheel, blade, wireless remote, stumps run in fear. Just Sayin
 
welltree said:
If anyone is looking to buy a new stump grinder I have something you may want to try. Today I tried a bandit 2650 machine and was very surprised, I have always like rayco stumpers as we run 9 of them but newer machines have not been as good as rg50 , RGsuper50 but I was impressed by this new model bandit. 61 hsp with a 69 inch arc and 18.5 inch depth was a nice smooth machine. It had a revolution wheel on it .i removed a 4ft white elm stump that was 10 inch above ground to 14 inch below in 30 min.just my opinion but give it a try if you have a chance
Click to expand...
Nice what's the price on it? I'm looking to upgrade mine in the spring also. Almost bought a 2550 last year I think you demo'd from nortrax on highway 11
 
deevo said:
Nice what's the price on it? I'm looking to upgrade mine in the spring also. Almost bought a 2550 last year I think you demo'd from nortrax on highway 11
Click to expand...
Not sure of price I did get it from Chris at nortrax , demoed the 2550 last year and wasn't as impressed by it so I went with rayco rg1645, couldn't believe there was no engine bonnet on 2550
 
deevo said:
Nice yeah I wondered the same thing and didn't have the revolution wheel either!
Click to expand...

We run a 2900t and could probably get away with the 65hp model it's actually pretty fast. It would have to be a pretty big stump to take 30min. We have a smaller 44hp model and once your familiar with it you can really move with them.

Deevo if your in need of a stumper let me know I think our 44hp Kabota has 100 hours on it we don't use it to much anymore. We bought it to use it all the time then got a lot clearing contract and needed something on tracks. I even have a custom aluminum trailer built for it tilt deck and the whole nine.
 
Last edited:
mattfr12 said:
We run a 2900t and could probably get away with the 65hp model it's actually pretty fast. It would have to be a pretty big stump to take 30min. We have a smaller 44hp model and once your familiar with it you can really move with them.

Deevo if your in need of a stumper let me know I think our 44hp Kabota has 100 hours on it we don't use it to much anymore. We bought it to use it all the time then got a lot clearing contract and needed something on tracks. I even have a custom aluminum trailer built for it tilt deck and the whole nine.
Click to expand...

What do u want for the 44hp one?
 
You must log in or register to reply here.

New threads New posts

Back
Top Bottom