OG Rope Runner, OG ZigZag w/ZagWrench tether and wrench, ascenders, kid’s harness, more

Jonny

Been here much more than a while
Location
Buffalo
Hoping to sell off some gear that I don’t use, some of it is new or like new. PayPal Friends and Family only unless you’re near Buffalo, NY and want to do local pickup with cash. If you’re in the continental US, I’ll cover shipping on everything except the Stable Braid, it’s around 40 pounds and it might be cost prohibitive for me to cover the shipping. I got a busy few days ahead, but I can get the stuff shipped by Thursday 11/7 at the latest.

Kids climbing/ sit harness made by CMI, come with mesh drawstring bag. We used this 3 times, maybe 2 hours total usage before I bought the kids a New Tribe kid harness. I haven’t measured, but it’s a pretty small waist, maybe 20” to 26” waist. Spencer and Omar are pretty thin and it fit them fine with room to spare when they were 6 or 7.
40$ shipped to continental US.
IMG_2194.jpeg

OG Singing Tree gold Rope Runner, very low hours, that is the original friction plate.
200$ shipped.
IMG_2197.jpeg
IMG_2199.jpeg

*SOLD *
OG ZigZag set up for SRT with ZagWrench tether and new ISC black ZK2 RopeWrench. I’m hesitant to sell this, even though I don’t use it. Hoarder mentality I guess. The ZZ and tether are in excellent condition, very low hours, the ZK2 Wrench is unused. 300$ shipped.
*SALE PENDING *



IMG_2195.jpeg

Another OG I bought this Petzl Pantin in 2005 and haven’t used it much, but it’s been riding around in my gear bag and is the finish isn’t pretty. Right foot.
50$ shipped
IMG_2201.jpeg

*Left footie (gray) is sold*

CT foot ascenders, very good to excellent condition, gray one for left foot, orange one for right foot.
50$ each, shipped.

IMG_2202.jpeg

AllGear 5/8” Whoopie sling, adjusts from around 3’ to 6’ never used but maybe a little dusty from hanging on a hook in the garage.
40$ shipped.
IMG_2204.jpeg

5/8” Whoopie sling with Notch size 2 ring. Never used, adjusts from 2’ to 4’.
75$ shipped.
IMG_2206.jpeg

*SOLD*
OG HAAS knee ascender. Used, not pretty, but still works just fine.
40$ shipped.


IMG_2203.jpeg
 
Last edited:
* SALE PENDING *
New 250’ 5/8” Samson Stable Braid, still on the spool and wrapped.
This is around 40 lbs and kind of bulky, maybe it’d be easier to ship if I took it off the spool and coiled it or flaked it into a box, but until I know it’s sold, I want to leave it on the spool. 200$ plus actual shipping costs. Also available for local pickup in Buffalo, NY.
IMG_2210.jpegIMG_2208.jpeg

Rock Exotica OmniBlock 2.6” Material Handler pulley. The MH Omnis are red and rated in pounds force/ lbf as opposed to the more common Omnis that are orange and rated in kilo newtons/ Kn. I don’t think there’s any other difference. These are intended to be used with 1/2” rigging ropes. Like new, spliced onto a 9’ Ultrasling made from 1/2” Tenex Tec. I can bury the tails and make it prettier if you like, just didn’t seem important to me.
200$ shipped.

IMG_2207.jpeg
 
Last edited:
New 250’ 5/8” Samson Stable Braid, still on the spool and wrapped.
This is around 40 lbs and kind of bulky, maybe it’d be easier to ship if I took it off the spool and coiled it or flaked it into a box, but until I know it’s sold, I want to leave it on the spool. 200$ plus actual shipping costs. Also available for local pickup in Buffalo, NY.
View attachment 96075View attachment 96076

Rock Exotica OmniBlock 2.6” Material Handler pulley. The MH Omnis are red and rated in pounds force/ lbf as opposed to the more common Omnis that are orange and rated in kilo newtons/ Kn. I don’t think there’s any other difference. These are intended to be used with 1/2” rigging ropes. Like new, spliced onto a 9’ Ultrasling made from 1/2” Tenex Tec. I can bury the tails and make it prettier if you like, just didn’t seem important to me.
200$ shipped.

View attachment 96078
Are you going to TCIA next week?
 
New 250’ 5/8” Samson Stable Braid, still on the spool and wrapped.
This is around 40 lbs and kind of bulky, maybe it’d be easier to ship if I took it off the spool and coiled it or flaked it into a box, but until I know it’s sold, I want to leave it on the spool. 200$ plus actual shipping costs. Also available for local pickup in Buffalo, NY.
View attachment 96075View attachment 96076

Rock Exotica OmniBlock 2.6” Material Handler pulley. The MH Omnis are red and rated in pounds force/ lbf as opposed to the more common Omnis that are orange and rated in kilo newtons/ Kn. I don’t think there’s any other difference. These are intended to be used with 1/2” rigging ropes. Like new, spliced onto a 9’ Ultrasling made from 1/2” Tenex Tec. I can bury the tails and make it prettier if you like, just didn’t seem important to me.
200$ shipped.

View attachment 96078
I'll take the block and stable braid.
 
I’ll take the pantin footie
I could use the 5/8ths but shipping would kill it. Anyone wanna go in half’s? Johnny could you cut the spool and rope if someone want to split it?
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom