It was set at any desired location long after accessing the tree. In that video (which could be titled ‘Tree Climber Soup’, brilliantly produced by
@moss), I had accessed a lower region with a Canopy Anchored Stationary System. I then switched to a Moving System to alternate my way to the top.
After that, I set a Cambium Saver and began moving around and checking out the tree. That’s when I began transitioning back and forth from Moving to Stationary, but without altering my Cambium Saver.
There are times when a moving system is ideal for anchoring, but you might want to move considerable distance up and down. By making the switch as I did in that vid, you can get the 1:1 benefits of SRS when you need it. Then you can alter back to MRS without going all the way back to your Canopy Anchor. It’s all done mid-line, wherever, whenever.
Hope that all makes sense!