2022 foot ascender recommendations

I like Harken Ninja. The cam material is different between Ninja & Jetstep . That's what I heard. Ninja got stainless steel. Jet step got Aluminum. Same looks but not different in wear and tear , heavier or

The cam. the cam Materials differences.Thats what they says. Can you put magnet and see the differences ? Stainless steels must have magnetic pull .
There are non or barely magnetic stainless steels as well, they're pretty common.
 
There are non or barely magnetic stainless steels as well, they're pretty common.
Ok so both are Stainless steel or both aluminum then. Next time , When I see a harken employees I'd smack that lips so hard that they mis-duscribed on used its materials on Ninja and caused such a humiliations over me being called ME out as an B.Sh!tter.
Such a embarrassment right infront of everyone . LMAO

Screenshot_20221207-175542_Chrome.jpg
 
Last edited:
I’ll add my .02, but it’s just another jetstep vote.

For anyone reading that has had trouble with the jetstep, where it’s positioned on the boot makes a big difference. If it’s too low, near the sole, it will cause more kickouts. It needs to ride higher, so it “leans back” and gravity pulls the line into the cams and not away from them.
 
I’ll add my .02, but it’s just another jetstep vote.

For anyone reading that has had trouble with the jetstep, where it’s positioned on the boot makes a big difference. If it’s too low, near the sole, it will cause more kickouts. It needs to ride higher, so it “leans back” and gravity pulls the line into the cams and not away from them.
You got that shit right. I never kickout. With or without my SAKA.
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Teufelberger Westminster X-Rigging Teufelberger
Back
Top Bottom