Bart_'s latest activity

  • B
    Perhaps these rubber units could be paralleled with the rip/zip unit in an SRT base tie to gain more soft catch capability good...
  • B
    Bart_ replied to the thread New device from ISC.
    Bobs yeruncle post 1st pic patent pending, my misspoke. Indeed there's a rope pinch inside the body which to quick thought appears to...
  • B
    Bart_ replied to the thread Stihl RS chain points.
    FWIW I'm going to tune up the teeth points some more and redo some top edges that had bad edges hiding under the file flash. I guess...
  • B
    Bart_ reacted to davidwyby's post in the thread Stihl RS chain points with Like Like.
    Safety chain has double rakers, etc. I think you are referring to semi chisel which has a round point. May or may not be Safety. Cuts...
  • B
    Bart_ replied to the thread Tall skinny Ash.
    Local guy pieced them down with a lift. First small pieces tried in wood stove went well. Ash branches stay put as they dry...
  • B
    Bart_ replied to the thread Stihl RS chain points.
    Would the speed difference between a properly pointed RS vs slightly muffed point RS be the same dfferential as RS vs round tipped...
  • B
    Bart_ reacted to Reach's post in the thread Stihl RS chain points with Like Like.
    I haven’t used a gauge in years, I set rakers by eye, but every chain in our shop is sharpened on a grinder on a bench. I do not like...
  • B
    Bart_ replied to the thread New device from ISC.
    Only 2 1/2 zigging links is a bold decision, which partially prompts my question about a possible rope pinch inside. Wonder how they...
  • B
    Bart_ replied to the thread Fu*%face Von Clownstick.
    Imagine if this is the beginning of the end of democracy as we know it; police state, fascism, racism, sexism, indefinite terms in...
  • B
    Congratulations! May I suggest you experience the pride of building/using a powered ascender to luxury ride up the tree? Pride of...
  • B
    Bart_ replied to the thread Stihl RS chain points.
    I think the only guide I've got was for my first ms260 and it showed slight raker tip recess on a new in box rs chain with the 0.016"...
  • B
    RS is rapid super and has a squared cutting point (at the junction of the side cutting face and the top cutting face) as opposed to...
  • B
    Bart_ replied to the thread New device from ISC.
    Does anyone know if there's a rope pinch hiding inside the lower body? Looks like non-vegetarian construction ie it's got beef :)

New threads New posts

Back
Top Bottom