Say car ramrod!
- Thread starter rugger01
- Start date
macswan
Been here a while
- Location
- Champlain Valley, VT
Seth, I do not know what in the hell you are talking about...but thank you for naming your thread this name
wyoclimber
Participating member
- Location
- Cody, WY
Meow what is so damn funny meow?
macswan
Been here a while
- Location
- Champlain Valley, VT
That little guy?...I wouldn't worry about that little guy.
macswan
Been here a while
- Location
- Champlain Valley, VT
And my personal favorite.
"You're a sick fucker Mac"
Sorry about all this Seth.
"You're a sick fucker Mac"
Sorry about all this Seth.
JontreeHI
Branched out member
- Location
- West Michigan lakeshore
I don't want a large farva, I want a liter'a cola
MikePowers321
Carpal tunnel level member
- Location
- Leeds, Ny
Hey Farva what's the name of that restaurant you like with all the goofy shit on the walls and the mozzarella sticks?
wyoclimber
Participating member
- Location
- Cody, WY
Sorry Seth.
wyoclimber
Participating member
- Location
- Cody, WY
Shenanigans!
- Location
- Home of the New Jersey Devils
On a serious note 
I remember something not good about them...I'll ask Carl.
I remember something not good about them...I'll ask Carl.
kstreehuggerco
Participating member
- Location
- Loveland. Co
I'll believe that when my shit turns purple and smells like rainbow sherbert.
frashdog
Branched out member
- Location
- Champlain valley, adirondack coast
We love our wheeled w/turf tires 900t. Worth several men! I've used a few tracked jobbers, not impressed.
Repowered it with kohler 25hp. Tons of room to get at say, replacing a hose or pulling the pump... Looked at the diesel versions, nightmare for working on and cost of replacement engines.
Dealing with the Canadian company (Leon's ?) has been hit or miss, terribly annoying sometimes.
Find out where to get anything you need, not from the company. They once sent us wheels that did not fit, then would not pay to ship them back...that was the final straw for us.
Repowered it with kohler 25hp. Tons of room to get at say, replacing a hose or pulling the pump... Looked at the diesel versions, nightmare for working on and cost of replacement engines.
Dealing with the Canadian company (Leon's ?) has been hit or miss, terribly annoying sometimes.
Find out where to get anything you need, not from the company. They once sent us wheels that did not fit, then would not pay to ship them back...that was the final straw for us.
southsoundtree
Been here much more than a while
- Location
- Olympia, WA
Round up Johnny Chimpo, Gerry the Giraffe...
Lumberjack
Branched out member
On a serious note
Service/parts can be very hit or miss, emphasis on the later from what I've heard. The machines are a solid older Chevy style (not fancy but get it done), the engine/pump can be sourced aftermarket fairly easily.
- Location
- Thunder Bay, Ontario
We own an 1150 tracked machine. When it isn't broken it kicks ass. I can't offer an opinion on comparison since it's all we've used.
We have many many problems with the tracks and drive chains. Many. It's down right now because one of the axels sheared off. I will dig into that problem in the morning.
We've also replaced the attachment plate (the part on the machine, not on the attachments) because it fell apart.
Dealing with Leon's is definitely Miss. Their prices are high, their service is terrible.
So far we just keep fixing small things on our own which isn't too expensive otherwise I would be looking to sell it and buy something else.
I think it's worth buying if you are handy with the machines (unlike me) and if the purchase price is really low. Otherwise look elsewhere.
V
We have many many problems with the tracks and drive chains. Many. It's down right now because one of the axels sheared off. I will dig into that problem in the morning.
We've also replaced the attachment plate (the part on the machine, not on the attachments) because it fell apart.
Dealing with Leon's is definitely Miss. Their prices are high, their service is terrible.
So far we just keep fixing small things on our own which isn't too expensive otherwise I would be looking to sell it and buy something else.
I think it's worth buying if you are handy with the machines (unlike me) and if the purchase price is really low. Otherwise look elsewhere.
V
macswan
Been here a while
- Location
- Champlain Valley, VT
IT'S DELICIOUS!
