ARLO
Branched out member
A friend recently gave me a couple of 200' pieces of new Edelrid Woodpecker rope, which is an 11.7 double-braid that is much like Tachyon in that it has 3 additional strands inside the braided core. I was not particularly impressed with the thin, wimpy splice that Edelrid uses for this rope so I tried a standard Tachyon splice and it works great. Like Tachyon you have to pull hard to complete the bury, but the end result is a really nice splice. So if any of you are wanting to try this rope, and don't care if you can pull the splice through a small piece of gear, I suggest you try it with the Tachyon splice.
Here are a few tips: You MUST taper the core in order to pull it through the cover. Use a wire fid for all buries. Massage and hammer the rope liberally to finish the bury. That last inch is tight.
Here are a few tips: You MUST taper the core in order to pull it through the cover. Use a wire fid for all buries. Massage and hammer the rope liberally to finish the bury. That last inch is tight.










