WTB Large Chip Truck

HigherGroundArborist

Active Member
Location
Granger
Looking to purchase a large chip truck before the end of the year. The ideal truck we‘re looking for would be a 2005-2010 Freightliner M-2 with auto trans and 14’ dump box or larger. Willing to consider anything similar.
 

Brianmcc

New Member
Location
Harleysville
We will have our 2011 kenworth t440 with a 20x8x8 body for sale in the very near future. We are just waiting on southco to finish up our new truck. Let me know if you have any interest
 

Brianmcc

New Member
Location
Harleysville
Those are the only photos I had on my phone but can take more. Truck is located in harleysville pa (about 45 minutes outside of Philadelphia) it’s a 2011 kenworth t440 it has a 350hp px8 motor and an Allison 3500rds auto trans. Truck has roughly 190k miles I drive it almost everyday and it’s a solid truck pulls a full body and an grapple chipper easily. We are looking to get around $100,000 for the truck. We are hoping our new truck from southco will be done sometime in January
 

Attachments

  • C39AE270-E967-4189-8C77-896697A11EAA.jpeg
    C39AE270-E967-4189-8C77-896697A11EAA.jpeg
    3.6 MB · Views: 106
  • 380CC0BC-0244-4C42-94BC-5D06B06943EF.jpeg
    380CC0BC-0244-4C42-94BC-5D06B06943EF.jpeg
    4.5 MB · Views: 84

HigherGroundArborist

Active Member
Location
Granger
Those are the only photos I had on my phone but can take more. Truck is located in harleysville pa (about 45 minutes outside of Philadelphia) it’s a 2011 kenworth t440 it has a 350hp px8 motor and an Allison 3500rds auto trans. Truck has roughly 190k miles I drive it almost everyday and it’s a solid truck pulls a full body and an grapple chipper easily. We are looking to get around $100,000 for the truck. We are hoping our new truck from southco will be done sometime in January
Thanks for the reply! That’s a nice truck, although bigger and pricier than what we’re looking for. Our budget is going to be between $30,000-$60,000. Thanks.
 

VenasNursery

Well-Known Member
Location
Michigan
Those are the only photos I had on my phone but can take more. Truck is located in harleysville pa (about 45 minutes outside of Philadelphia) it’s a 2011 kenworth t440 it has a 350hp px8 motor and an Allison 3500rds auto trans. Truck has roughly 190k miles I drive it almost everyday and it’s a solid truck pulls a full body and an grapple chipper easily. We are looking to get around $100,000 for the truck. We are hoping our new truck from southco will be done sometime in January
Bad to the bone
 

Gerasimek

Active Member
Location
Western PA
I have purchased 3 of my trucks from trucksite.com . They have all sorts of clean, municipal trucks to choose from and they'll ship it right to you from CA. The most recent one I bought was this hooklift. I then had a 20' box built for it to chip into.
 

Attachments

  • 20201012_164612.jpg
    20201012_164612.jpg
    2.8 MB · Views: 44

Fivepoints

Well-Known Member
I have purchased 3 of my trucks from trucksite.com . They have all sorts of clean, municipal trucks to choose from and they'll ship it right to you from CA. The most recent one I bought was this hooklift. I then had a 20' box built for it to chip into.
How tall is that chip box? We recently bought a roll off truck and haven't figured out how tall a box we want to chip into.
 

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Kask Teufelberger Westminster X-Rigging Teufelberger Tracked Lifts Climbing Innovations
Top Bottom