Search results

  1. C

    Show off them splices

    Thanks Tommy, I'll give that a try...nice splices by the way...
  2. C

    Show off them splices

    So have many of you guys spliced any 8 mil ocean lately? I tried splicing some up a few days ago and......lets just say the cover is still taped to my wire fid going thru the crossover section...it's super tight. I had to put it down to try and finish up another day...any tips?
  3. C

    Eye splicing Yale rope - help !!!

    Yea, what oceans said. I noticed that too. A long fid length is the way to go.....I usually put a 2 inch taper on the core and stick it thru my wire fid but leave the entire taper parallel to fid (not folded back) then just tape it starting at the wirefid then keep the tape tight as possible...
  4. C

    re-braided double locked brummel

    Not sure what the braid is called, I divided the strands into 6 pairs then braided them evenly and as tight as I could get them. Any special or certain braid you recommend nick?
  5. C

    re-braided double locked brummel

    I sure do appreciate it Tuttle.
  6. C

    re-braided double locked brummel

    Yea, I braided it as tight as I could get it then taped it to the wire fid and pulled it in for final bury then tapered it and stitched it. I wish I would have put heat shrink on it before so I could shrink it over the brummels. Instead I just whipped over the brummels really tight with waxed...
  7. C

    Documenting my hand-sewn eye process

    Hitman that is soooo badass! Excellent work!
  8. C

    re-braided double locked brummel

    What do you guys think about this process and it's strength? I made it out of 3/8ths nerex with dmm rings and chafe sleeve to help with picking. I buried the tails 8" with a taper
  9. C

    Whats your favorite light duty pulley ?

    I have to go with the other guys, omni block 1.5 on a heavy duty cmi 14,000 lb loop sling or on an adjustable 3/8ths amsteel whoopie with a cordura chafe sleeve
  10. C

    Bull Rigger Bollard

    Well, here it is.... Shout out to Luke for having the faith in my product and for the rest of you who have been using my bull riggers... If you guys have any cool pics or videos I would love to see them posted here. Thanks guys. http://www.treestuff.com/store/catalog.asp?item=3525
  11. C

    TreeMotion Saddle

    I girth my saw lanyard thru the rear ring then short hang the saw on caritool. If I'm ascending a long way or coming down I'll just let it hang straight down from rear ring.
  12. C

    Throw Bag with Rings on Both Ends?

    Hey, that's great tuttle. I would really appreciate it. Pm sent
  13. C

    Throw Bag with Rings on Both Ends?

    Tuttle how much for the slug? Can you make a 12 oz? I'm interested and would be willing to give one a shot....
  14. C

    X-rigging rings

    Great looking rig there nick, why did you make it so long tho? Is it so it would be easier to install in a crotch... Meaning that you could just throw one ring over what ever crotch you chose as a rigging point and then just equal it out and install the rigging line?... I can't wait to use mine...
  15. C

    X-rigging rings

    So is anyone else using the double large x rings as a replacement for a block ? I just spliced two of them onto a 5/8ths tenex sling about 4ft total length with a cordura sleeve to use as a rigging point for my 1/2" & 9/16ths rigging lines...anyone use this setup and if so what do you think...
  16. C

    Setting up the rope wrench with the hh pulley

    What is the hybrid,? Sorry for the derail guys.....
  17. C

    Just ordered two large x rigging rings from Luke

    Lets see your rig saver, can u post a pic, I'm looking for something that I can use instead of setting a block. Do u think a double xring (large) would be a sufficient bend radious for 1/2" & 9/16ths
  18. C

    Just ordered two large x rigging rings from Luke

    So I just ordered 2 large x rings and I'm wanting to make a sling that has an x ring on both sides, one that I can take up with me and wrap it around the stem I will be using as a rigging point, my question is what rope should I make it out of? 3/4" tenex or stable braid? I will be putting a...
  19. C

    Setting up the rope wrench with the hh pulley

    Yes, Jay does a terrific job of work with those splices. I just got an adjustable Ring to ring FS made out of cougar blue and green Armor prus with the dmm rings. I'm gonna get to use it tomorrow, can't wait. My go too hitch cords are beeline,ArmorPrus & HRC all in 8mm, anywhere from 24-30"...
  20. C

    Setting up the rope wrench with the hh pulley

    Damn Paul, your hitch cords should be in a calendar.they are looking beautiful! How u like that ultra tech?.. You get all those from moosehead? "jay"
Top Bottom