Recent content by BrianG

  1. BrianG

    Petzl products on the low low...

    Hi Keith, Do you think he can get any discount on a replacement footloop for my Petzl Pompeii hand ascender?
  2. BrianG

    Avatar

    lightning
  3. BrianG

    Rope Wrench Mania

    when I figure out what length works good with my hitch, I'll splice up a loop fixed at that length with this 3/16 cord or pull some core from HRC and use that
  4. BrianG

    Rope Wrench Mania

    Have to double check, but I'm quite sure this is New England Vectran (V-12?) I believe it's the same as the core of HRC cord, but just 1 mm smaller ( 4,950 lbs. tensile) Debated whether to make a loopie or whoopie, but thought to try the loopie first
  5. BrianG

    Rope Wrench Mania

    been busy and haven't had much time to try out my wrench, tried one of my quickdraw slings, but the length was wrong so I came up with this idea after getting some small (3/16") 12 strand....a mini loopie sling, so I can adjust the length
  6. BrianG

    HRC

    Thank you for posting the splicing instructions Nick
  7. BrianG

    HRC

    I know the break-testing results for the spliced eye n eye vary due to tail bury length, lock stitching, etc... but does anyone know of any break-testing done for hrc tied with dbl fishermans? Just curious...for comparison sake
  8. BrianG

    HRC

    I put the whipped eye n eye on the Lava lanyard I made recently and it's working great. I'm using the webbing/shrink tube one with the hitch climber pulley on my climbing line. I'm comparing the hitch's "action" with using the spliced eye n eye to just tying a length of hrc onto the biner...
  9. BrianG

    HRC

    here's what I did for my HRC eye n eye's. Both have 6" tail bury (last 2" of tails tapered) and lock stitched the length of the tail buries before sliding the cover back up to the eyes. Did whipping on the first one, and then I thought to cover the eyes on the second one with some small...
  10. BrianG

    Brought my 020T back to life

    Thanks Steve. I bought this saw back in 1999, it has always run strong without any problems, with the exception of when it hit the frozen ground from about 40'. Even then I put the broken spark plug back in place (the boot held it together) and with the remaining fuel in the lines it started...
  11. BrianG

    Brought my 020T back to life

    bar and chain back on and done....for now, still need to clean it all out good with the air compressor and swap in a few other newer parts
  12. BrianG

    Brought my 020T back to life

    now filter and cover on
  13. BrianG

    Brought my 020T back to life

    carb is on
  14. BrianG

    Brought my 020T back to life

    putting the nice clean carb back on
  15. BrianG

    Brought my 020T back to life

    putting the new handle on

New threads New posts

Kask Stihl NORTHEASTERN Arborists Wesspur TreeStuff.com Kask Teufelberger Westminster X-Rigging Teufelberger Tracked Lifts Climbing Innovations
Top Bottom